Once the industrial aluminum profiles
are bent or bent, then this material will be scrapped and recast in the furnace, which is directly the loss of economic benefits for the manufacturer, and the delay of the construction period for the customer. So, how to reduce or even put an end to the bending of industrial aluminum profiles?
1. Extrusion straightening: straightening is one of the most serious links causing the bending of industrial aluminum profiles, straightening workers must pay attention to the strength used when straightening, if the force is too large may make the profile deformation, closing, orange peel and other damage, if the force is too small will make the profile is not straightened, resulting in bending results.
2. Extrusion framing: saw after the length, the aluminum profile will be framed, the fashion frame worker will be detailed: this material is aniseed or small material, is the material with pipe or plane die pulled out of the material? Generally speaking, aniseed and tube material, lifting two ends of the frame is not easy to cause bending, but small material plane die pulled out of the material, lifting two ends is easy to cause bending, then it should be from both ends to the center of the lifting frame.
3. Appearance disposal penalty shelf: billet aging, hardness has reached the standard, aluminum profile is not so easy to bend, but the shelf as usual to be careful, two lifting material, just even if stop up and down wildly bumpy, wildly bumpy will cause certain bending of the aging aluminum profile.
The above points are about how to eliminate industrial aluminum profile scrap essentials, according to this essentials to experiment, will certainly have some help. In order to reduce the elimination rate, we must be strict in the production of industrial aluminum profile time according to the production scale to produce, detailed details, only in this way can the scrap of aluminum alloy profile.