Industrial aluminum profiles
customization is to start the die extrusion from scratch. In this process, it is necessary to carry out the mold trial process. Why do you want to try the mold? What does that mean?
Let's understand the reasons for the trial of industrial aluminum profiles from the following points.
1. In order to prolong the processing operation time, it is necessary to preheat the oil temperature of the hydraulic oil first, so that the melt temperature can be stabilized.
2. In order to adjust the operation of the extrusion machine, usually industrial aluminum profiles products have a certain shrinkage, reference to the maximum and value of the product size to adjust the extrusion machine, if the numerical deviation is too large, you can adjust the size of the gate to operate.
3. For each hole size deviation can be corrected, if the hole and the door size can be good, you can adjust the filling speed and frequency of the industrial aluminum profiles extrusion machine or the temperature of the mold to modify, at the same time to carefully check whether there is a hole filling speed did not keep up with.
4. See if the position of the die hole or the die core is moved, you can also see if the filling rate is uniform, and whether the mold temperature is constant temperature, if there is an abnormal situation to modify in time.
5. Check the working condition of the aluminum extrusion machine at any time, check whether there is an abnormality in the oil pump, valve and temperature control part. If there is an abnormal condition in all links, it will cause problems for our processing.